# 3PL pick and pack fees: first pick vs. every-unit pricing

How do 3PL pick and pack fees work: does the order fee include the first pick, and what do additional picks cost?

[Pick and pack](/guides/glossary/pick-and-pack) fees cover pulling and packing each order. On ecommerce rate cards they're usually billed one of two ways: an order fee that includes the first pick plus a fee per additional unit, or a lower order fee plus a pick fee on every unit. Less often, 3PLs charge per unit only or one all-in price per order.

## Why the pick structure matters

Whether the order fee includes the first pick changes what that fee buys, so two quotes can't be compared on order fee alone. Take two illustrative quotes that both charge $0.40 per billed pick. A $1.75 order fee that includes the first unit and a $1.35 order fee that doesn't bill the same on every order. Which quote costs less depends on the rates and your units per order, so price each quote on the same month of your own orders, as the worked example does.

## How 3PL pick and pack pricing works

On activity-based rate cards, DTC (direct-to-consumer) pick and pack is billed through an order fee, a pick fee or both[5]. Wholesale (B2B) orders can carry their own order fee plus [case](/guides/glossary/case-pick-fee) or pallet picks; see [B2B pick fees: each pick vs. case pick vs. pallet pick](/guides/b2b-pick-fees-each-case-pallet).

### What the order fee covers

The [order fee](/guides/glossary/order-fee) is a flat fee per order shipped, also billed as order processing, order charge, base fee or per-order fee (and, at a few 3PLs, "pick ticket"). A pick is pulling one unit from its storage location; a pack fee covers boxing, labeling and preparing the order, and some 3PLs itemize it while others combine it with picking[10]. In the invoices we review, a separate pack line is uncommon. Packing labor usually sits inside the order fee, whether or not that fee also includes the first pick.

Packaging materials can be billed separately, included in the order fee[2] or supplied by you; see Packaging materials: who supplies them, how they're priced, and markup. At some 3PLs, "fulfillment" or "pick and pack" also covers the shipping label. Fee definitions can sit in the contract or statement of work (SOW) as well as on the [rate card](/guides/glossary/rate-card)[7].

### Order fee that includes the first pick

In this structure, the order fee covers the first unit picked, and each unit after it carries an [additional pick fee](/guides/glossary/additional-pick-fee)[1],[15]. Rate cards and invoices name that second line "additional pick", "additional unit", "each additional unit" or "extra picks"[1],[2]. On illustrative rates of $1.75 per order including the first unit, plus $0.40 per additional unit, a 3-unit order costs:

$1.75 + (2 × $0.40) = $2.55

Some 3PLs bill the [first pick](/guides/glossary/first-pick) on its own "first pick" or "first unit" line instead of an order fee, which changes the line names but not the arithmetic[4]. Some order fees cover more than one pick, so ask at what unit count the additional rate starts[8].

### Order fee plus a pick on every unit

In this structure, the order fee excludes picks, and every unit, including the first, carries a [pick fee](/guides/glossary/pick-fee) (also billed as unit pick, item fee, each pick or eaches)[3],[16]. A single-unit order therefore shows two charges: the order fee and one pick. On illustrative rates of $1.35 per order plus $0.40 per unit, a 3-unit order costs:

$1.35 + (3 × $0.40) = $2.55

When the every-unit pick rate equals the additional-pick rate and the order fee is lower by exactly one pick, the two structures cost the same at every order size. Among observed DTC 3PL contracts where picks can be classified, the two are about equally common (roughly 40–50% each) and often come out at a similar pick-and-pack cost per order once the first pick is counted.

### Per-unit pricing and all-in pricing

Two other structures appear less often on DTC rate cards. Per-unit pricing charges a fee for each unit, with no order fee. As of October 2026, Amazon's Multi-Channel Fulfillment prices this way, by product size, shipping weight, units per order and delivery speed, with shipping included[14].

All-in pricing charges one fulfillment price per order, set on an assumed average number of picks per order[13] (an "all-in" shipping line instead means postage with surcharges included). It appears mainly at large tech-enabled 3PLs, often still bills units beyond a set count, and usually excludes postage[17], though some include the shipping label. See All-in or per-order pricing: pros, cons and hidden assumptions.

### How "additional" is counted: units, lines or SKUs

Additional picks are usually counted per unit, but some contracts count order lines or SKUs (stock-keeping units) instead[3],[6]. An order line is one SKU on an order, in any quantity. The basis changes the count:

| Order | Additional units | Additional lines |
| --- | --- | --- |
| 3 units of one SKU | 2 | 0 |
| 3 different SKUs, 1 unit each | 2 | 2 |

Per-line counting bills fewer picks for brands that ship several units of one SKU[9]; see Single-line vs. multi-line orders: why the difference matters. Some setups add a rate for the first unit of each different SKU[4], or a ladder of first line, extra line and extra unit.

A kit pre-built and stored as its own SKU is picked as one item, while a bundle assembled at packing is picked one component at a time. Some billing systems count each kit component as a pick unless they're set to treat the kit as one[4]. See Kitting and assembly pricing: per kit, per component or hourly.

### Other things that change the order fee

Some 3PLs price the order fee by packaging format, such as mailer or box[2]. Others vary it by product type, add surcharges for heavy, oversize or fragile items per order or per unit, or raise order and pick rates for peak season. See also [Tiered and volume-based pricing](/guides/3pl-tiered-pricing-volume-discounts), [Annual price escalators and CPI clauses](/guides/3pl-price-escalators-cpi-clauses) and Rush, same-day and priority order fees.

## How to tell which structure your contract uses

Three checks show which structure you're on:

1. **Read the order-fee definition.** Look for wording such as "includes first unit", and check whether additional picks apply "after the first pick"[1],[7].
2. **Look at single-unit orders.** One fee per order points to the first structure. An order fee plus one pick points to the second.
3. **Compare billed picks with units shipped on multi-unit orders.** Picks equal to units point to a pick on every unit; units minus one per order points to the first pick being included.

In the invoices we review, line names don't always show the structure: a line that reads like a pick on every unit can turn out to bill additional units only.

Counts can also differ for legitimate reasons. If an order ships in more than one package, check which kind it is: a true split (fulfilled across days or warehouses) customarily carries an order fee on each part, but a multi-parcel order (packed in two or more boxes at once) is one order with one order fee. Billed picks can also exceed units shipped when your contract prices a stocked branded box, printed cards[12] or inserts as picks; see Inserts, gift notes, samples and marketing collateral fees. To run these checks across a whole invoice, see Activity verification: did the billed activity actually happen?

## Worked example: comparing three pick structures (illustrative)

The rates below are illustrative, not benchmarks.

- **Quote A:** $1.75 per order, including the first unit, plus $0.40 per additional unit
- **Quote B:** $1.35 per order plus $0.40 per unit
- **Quote C:** $1.00 per order plus $0.60 per unit

| Units in order | Quote A | Quote B | Quote C |
| --- | --- | --- | --- |
| 1 | $1.75 | $1.75 | $1.60 |
| 2 | $2.15 | $2.15 | $2.20 |
| 3 | $2.55 | $2.55 | $2.80 |

**Month 1:** 2,000 orders: 1,100 with one unit, 600 with two and 300 with three. That is 3,200 units (an average of 1.6 per order), or 1,200 additional units.

- Quote A: (2,000 × $1.75) + (1,200 × $0.40) = $3,980, or $1.99 per order
- Quote B: (2,000 × $1.35) + (3,200 × $0.40) = $3,980
- Quote C: (2,000 × $1.00) + (3,200 × $0.60) = $3,920, or $1.96 per order

Quote C costs $60 less in Month 1.

**Month 2:** the mix shifts to 600 orders with one unit, 800 with two and 600 with three. That is 4,000 units (an average of 2.0), or 2,000 additional units.

- Quote A: (2,000 × $1.75) + (2,000 × $0.40) = $4,300, or $2.15 per order
- Quote B: (2,000 × $1.35) + (4,000 × $0.40) = $4,300
- Quote C: (2,000 × $1.00) + (4,000 × $0.60) = $4,400, or $2.20 per order

Quotes A and B now cost $100 less than C. On these rates, the three quotes cost the same when orders average 1.75 units: below that, C costs less, and above it, A and B do.

These figures are pick-and-pack fees only. Your total cost per order also includes packaging, other warehouse fees and postage, whether the 3PL bills postage at cost, marked up or on its own rates; see [Calculating your true cost per order](/guides/true-cost-per-order). Where your contract has a [monthly minimum](/guides/glossary/monthly-minimum) on fulfillment fees, order and pick fees count toward it ([Monthly minimums: how they're calculated, when they apply, how to negotiate them](/guides/3pl-monthly-minimums)).

## What a clear pick-and-pack clause looks like

A clear clause lets you reproduce every pick charge from your order data, which an undefined "pick fee" makes impossible[7]. It states:

- whether the order fee includes the first unit picked, written out in full rather than as shorthand such as "first pick free", which can be read two ways
- at what unit count the additional rate starts, and whether "additional" means units, lines or SKUs[7],[8]
- how kits and bundles are counted
- whether packing labor, packaging materials and the shipping label sit inside the order fee
- whether the order fee and first pick apply to each part of a true split (fulfilled across days or warehouses), and that a multi-parcel order carries one order fee
- each surcharge and its trigger, and how and when rates can change

## Common mistakes and red flags

In the invoices we review, common pick-fee disputes come from scope rather than price, such as extra picks charged twice.

- **Comparing order fees alone.** A quoted "pick fee" can mean the first item only or the whole order[11]. An order fee that excludes the first pick looks lower than one that includes it, even when the two bill the same.
- **The first pick charged twice.** The contract puts the first unit inside the order fee, but the invoice bills a pick on every unit, single-unit orders included.
- **The wrong counting basis.** Pricing a quote per unit when the contract counts lines or SKUs, or the reverse, changes the count on every order with more than one unit of a SKU[3],[9].
- **A single combined line treated as all-in.** One "pick and pack" line can rise by a fixed step with each unit, which makes it one of the two main structures under one name.
- **Kits billed per component** when the contract says per kit, or pick and pack billed on kitted orders that the kitting fee already covers; see [Pick fees on bundles or kits billed per component](/guides/3pl-kit-bundle-pick-fees).
- **Pricing on today's order mix.** When units per order rise, pick fees rise with them, as Month 2 of the worked example shows.

Each can come from a rate table or definition set up differently from the contract, rather than bad faith. For the wider list, see [The 25 most common 3PL billing errors and how to spot each](/guides/3pl-billing-errors).

## Questions to ask your 3PL about pick fees

Ask these before you sign, while definitions are easiest to change; see [What's negotiable and what isn't](/guides/negotiable-3pl-fees-and-terms).

Copy these into an email to your 3PL.

1. Does the order fee include the first unit picked, and at what unit count does the additional rate start?
2. Is "additional" counted per unit, line or SKU, and is a different SKU priced separately?
3. How do you count kits and bundles: one pick per kit, or one per component?
4. Are packing, packaging and the shipping label inside the order fee, and is a stocked branded box billed as a pick (Custom and branded packaging handling fees)?
5. Which surcharges apply per order or per unit, and what triggers each one?
6. Do you charge peak-season rates or volume tiers, and from what dates?
7. On a true split (fulfilled across days or warehouses), do the order fee and first pick apply to each part, and does a multi-parcel order carry one order fee?
8. Can you send order-level billing detail showing units, lines and picks billed per order? If it isn't standard, write it into the contract.

## Checklist: reading a pick-and-pack quote

- Find the order-fee definition on the rate card, or in the contract or SOW.
- Mark the first pick as inside or outside the order fee.
- Note the basis of "additional": unit, line or SKU.
- List every surcharge, peak rate and volume tier.
- Price your last three months of orders under each quote, split by orders of one, two, three and more units (Modeling total cost: running your real order history through each rate card).
- Get any unclear definition settled in writing, then compare the full quotes ([How to compare rate cards apples to apples](/guides/compare-3pl-rate-cards)).

## FAQ

### Does the order fee include the first pick?

It depends on your contract, not only on the 3PL's standard rate card. In the invoices we review, the same 3PL sometimes bills different brands on different pick structures. Read your own order-fee definition, then check one single-unit order on your invoice.

### Is per-unit or per-order pricing better for my orders?

It depends on your units per order. A low order fee with a high pick rate costs less on small orders and more as orders grow, as Quote C shows. Run three months of your orders through each quote and compare totals, not headline rates[9].

### Why did my pick fees go up when order volume stayed flat?

Pick fees follow units or lines, not orders, so they rise when each order holds more. Bigger carts, bundle promotions and kits added after the rate card was set can all do this[9]. If units per order didn't rise, check the billed rates against your contract for peak pricing or a rate change. See Why multi-unit orders cost more than you expect.

### How much should a 3PL charge per additional item?

No single figure fits: rates vary by 3PL, volume and product, and an additional-pick rate means little without the order fee beside it. Price your own order mix under each quote, and see What do 3PLs charge? Fee-by-fee ranges, with methodology and caveats for published ranges.
