# 3PL storage fees: per pallet vs. bin vs. cubic foot

How do 3PLs charge for storage, and is per-pallet, per-bin or per-cubic-foot pricing cheaper for my inventory?

3PL storage fees are charges, usually monthly, for the space your inventory occupies. Pallet positions are the most common unit, often combined with bin or shelf rates for small SKUs; fewer 3PLs bill per square foot or cubic foot. Per-pallet pricing favors full pallets, bins suit small low-quantity SKUs, cubic foot suits partial pallets, and square foot suits dedicated space.

## Why you can't compare storage rates across units

Storage rates in different units can't be compared directly: a pallet rate charges for every position however full, a cubic-foot rate for the volume of goods. At The Fulfillment Advisor's 2026 survey averages, $19.37 per pallet and $0.45 per cubic foot[1], which is cheaper depends on how full your pallets are and how each quote counts inventory.

For most DTC brands, postage is the largest part of 3PL spend and storage is often the smallest major line. But among charges billed every month whether or not you ship, storage is one of the largest, and a common place for billing errors: rates that drift above contract, counts that don't match your records, and inflated dimensions.

## How 3PLs price storage

3PLs price storage per pallet position, bin or shelf, cubic foot, square foot, storage location or, in B2B warehouses, per package[11], often combining units. Shares of observed DTC 3PL contracts with storage charges, mostly for DTC brands (last two rows: where invoices show the unit):

| Storage unit | Share of contracts |
| --- | --- |
| Per pallet | About two-thirds |
| Per bin or shelf | Roughly 40% |
| Per square foot | About one in ten |
| Per cubic foot or per unit | Rare |
| Two or more units | About two-thirds |
| Pallets for reserve plus bins or shelves for picking | A little over half |

### Per pallet (pallet position)

Per-pallet pricing charges a monthly rate for each [pallet position](/guides/glossary/pallet-position) (one rack or floor slot sized for one pallet), full or half empty[2],[9]. Half-pallet rates are uncommon, so this unit favors full pallets of a few SKUs. One 2014 pricing guide builds honeycombing, space lost to partly filled pallets, into its rate[16].

The [rate card](/guides/glossary/rate-card) defines a pallet by footprint (48 × 40 in is the US standard[15]) and loaded height. Caps commonly fall between 48 and 60 in, with about 55 in common at ecommerce 3PLs; check whether the cap includes the pallet itself. Over-cap pallets are billed as two positions[5], at a tall-pallet rate[6] or per cubic foot[13]. Public companies file some of their contracts with the U.S. Securities and Exchange Commission (SEC), which publishes them, so a few 3PL contracts can be read in full; the per-cubic-foot example comes from one of them[13].

Many ecommerce 3PLs require one SKU per location[4],[5], so a mixed pallet is broken down or billed as one position per SKU. Consolidating partial pallets is often negotiable, sometimes for a labor charge. See Partial pallets and rounding: how 3PLs count a "pallet" and Pallet height and weight standards and oversize pallet charges.

### Per bin or shelf

Per-bin pricing charges a monthly rate for each bin (a small container or shelf slot for low-quantity SKUs) or shelf (a larger slot) you occupy. Sizes aren't standardized: one 3PL's published card (September 2026) charges $3 a month for a 0.55 cu ft bin, $5 for 2 cu ft and $20 for a 15 cu ft shelf[5]. About a quarter of observed DTC 3PL contracts with bin storage use size tiers. Without dimensions, per-bin rates can't be compared. Under a one-SKU-per-location rule, bin, shelf and pallet charges grow with SKU count.

### Per cubic foot

[cubic foot storage](/guides/glossary/cubic-foot-storage) charges for the volume your goods take up, almost always the item or carton dims in the 3PL's warehouse management system (WMS) times quantity on hand, not the location's size[7],[9]. Some fulfillment networks bill this way[2],[7],[9], as does Amazon FBA, which is not a 3PL[14].

Cubic feet = (length × width × height, in inches) ÷ 1,728

Monthly charge = cubic feet per unit or carton × quantity on hand × rate

WMS dims are more often too big than too small (rounded up, case dims on single units, mixed-up units of measure), and an inflated dim overcharges monthly until fixed. See [Why accurate product weights and dims drive everything downstream](/guides/accurate-product-weights-dimensions).

As of October 2026, one large fulfillment network bills each SKU the greater of its cubic charge or $0.10 a day[7], about $3 a month (derived), up from $0.01 before February 5, 2026[8].

### Per square foot

Square-foot storage is a fixed rate for an area allocated to you, full or not[17]. It appears more in dedicated space and contract warehousing than in DTC fulfillment[10]. Quoted square footage often includes aisles and shared areas. One 2014 rate build counts 20.8 sq ft per floor position, including half the aisle[16], about 1.56 times a 48 × 40 in pallet's 13.3 sq ft (derived), so ask for the layout behind the number.

### Per storage location

Per-location pricing charges for each storage slot your inventory occupies[10], with a price for each slot type[5]. Location count depends on slotting, the 3PL's assignment of SKUs to pick and reserve (backup) locations, which can reflect velocity (ABC class: A fast, C slow). IWLA's standard terms for merchandise warehouses (2026 revision) also allow a minimum storage charge per lot per month[11].

Whether lots (batches) share a location depends on the 3PL's system and rules. Where each lot or expiry date gets its own pick location, for FEFO (first expired, first out) picking and recalls, one SKU with three live lots can take three locations. Some 3PLs mix lots in reserve storage and separate them only at the pick face.

A SKU can also hold stock in a pick location and in reserve at the same time; under per-location or per-pallet pricing, each occupied location is billed. Few 3PLs move a SKU to a smaller location on their own as it sells down; brands usually have to ask, and some 3PLs charge labor for the move. See Bin vs. pallet migration: when moving inventory saves money.

### When the count is taken

A storage count can be a one-day snapshot, a daily average[9], a peak, or prorated by the day or half month[3],[11], and some 3PLs also charge on receipt. The count method can change the bill as much as the storage unit does (compare the count rows in the worked example below); for how each method treats arrivals and departures, see [How storage is measured: snapshot, average, peak or billing-day count](/guides/how-3pls-measure-storage).

### Fees to keep separate from storage

Pallet in/out and receiving fees are charged per movement, not per period, under receiving, putaway, pallet pick or [accessorial](/guides/glossary/accessorial-fee) lines. If storage counts toward a [monthly minimum](/guides/glossary/monthly-minimum), savings that take eligible fees below the floor come back as a shortfall charge; whether storage counts depends on the clause.

About 30% of observed DTC 3PL contracts with storage charges also bill quarantine, returns, dock overstay or overflow storage separately, while aged-stock surcharges rarely appear on those invoices as their own line. In The Fulfillment Advisor's 2026 survey of 500 warehousing and fulfillment providers, 41% charged long-term storage fees[1], so check the contract for one. See [Long-term storage surcharges and aged-inventory fees](/guides/3pl-long-term-storage-fees) and Hazmat, temperature-controlled and secure-cage storage premiums.

## Side-by-side comparison: which method fits your inventory

Pallets fit few SKUs on full pallets; bins and cubic foot fit small or partial ones.

| Method | Billed on | Fits | Penalizes | Get in writing | 2026 survey average, all respondents (may include non-ecommerce warehouses)[1] |
| --- | --- | --- | --- | --- | --- |
| Per pallet | Each position | Few SKUs, full pallets | Partial and over-height pallets | Footprint, height cap | $19.37 per pallet |
| Per bin or shelf | Each bin or shelf | Small, low-quantity SKUs | Many SKUs, oversized bins | Bin and shelf dimensions | $3.03 per bin |
| Per cubic foot | WMS dims × on hand | Partial pallets, small items | Wrong dims, per-SKU minimums | Dims source, minimums | $0.45 per cu ft |
| Per square foot | Allocated area | Dedicated space | Empty space, unused height | Whether aisles are included | $1.26 per sq ft |
| Per location | Each slot, by type | Mixed catalogs | High SKU and lot counts | SKU and lot rules | None published |

For lot- or expiry-controlled products, test cubic pricing or location pricing with a lot consolidation rule; for seasonal build-ups, favor daily-average or prorated counts.

## The break-even rule: when pallet pricing beats cubic-foot pricing

Per-pallet pricing beats cubic-foot pricing when each pallet holds more cubic feet of goods than the pallet rate divided by the cubic-foot rate. The rule holds if both rates come from one rate set, count inventory the same way and carry no per-SKU minimum:

Break-even cubic feet per pallet = pallet rate ÷ cubic-foot rate

At the 2026 survey averages, $19.37 ÷ $0.45 = 43.0 cu ft[1].

Break-even fill rate = break-even cubic feet ÷ pallet capacity in cubic feet

A 48 × 40 in pallet stacked 48 in high holds 92,160 ÷ 1,728 = 53.3 cu ft, so break-even is about 81% full (43.0 ÷ 53.3); stacked 60 in high (66.7 cu ft), about 65%. For bins, $3.03 ÷ $0.45 = 6.7 cu ft, more than the bins on one published card hold (0.55 to 2 cu ft[5]), so at 2026 survey averages cubic beats any bin up to 6.7 cu ft, absent a per-SKU minimum.

## Worked example (illustrative)

In this illustrative month, cubic-foot pricing costs $182.70 against $353.64 for pallets and bins on a daily-average count; a per-SKU minimum raises it to $295.50. Rates are 2026 survey averages[1] over a 30-day month.

1. **Hero SKU.** 18 × 12 × 10 in cartons (1.25 cu ft), 40 per pallet in 5 layers: 50 cu ft, about 56 in tall on a 6 in pallet. Stock falls from 10 pallets to 8, 6, 4 and 2, one step every six days: an average of (10 + 8 + 6 + 4 + 2) × 6 ÷ 30 = 6 pallets, or 300 cu ft.
2. **Six mid SKUs,** each on its own pallet about 30% full: 15 cu ft each, 90 cu ft in all.
3. **Forty long-tail SKUs,** each about 0.4 cu ft in one small bin: 16 cu ft in all, flat all month, as are the mid SKUs.

**The month's bill**

| Method and count | Math | Monthly cost |
| --- | --- | --- |
| Pallet + bin, day-1 snapshot | 16 × $19.37 + 40 × $3.03 = $309.92 + $121.20 | $431.12 |
| Pallet + bin, daily average | 12 × $19.37 + $121.20 = $232.44 + $121.20 | $353.64 |
| Pallet + bin, last-day snapshot | 8 × $19.37 + $121.20 = $154.96 + $121.20 | $276.16 |
| Cubic foot, day-1 snapshot | 606 × $0.45 | $272.70 |
| Cubic foot, daily average | 406 × $0.45 | $182.70 |
| Cubic foot, last-day snapshot | 206 × $0.45 | $92.70 |

**Where the money goes (daily average)**

| Group | Pallet or bin | Cubic foot |
| --- | --- | --- |
| Hero | 6 × $19.37 = $116.22 | 300 × $0.45 = $135.00 |
| Mid SKUs | 6 × $19.37 = $116.22 | 90 × $0.45 = $40.50 |
| Long tail | 40 × $3.03 = $121.20 | 16 × $0.45 = $7.20 |
| Total | $353.64 | $182.70 |

Pallets win for the hero SKU, whose 50 cu ft pallets beat the 43.0 cu ft break-even, and cubic wins for the rest. The long tail costs $0.006 per SKU per day under cubic pricing (0.4 × $0.45 ÷ 30); with a $0.10 daily per-SKU minimum, the level one network uses[7], it costs 40 × $0.10 × 30 = $120.00, and the cubic total becomes $135.00 + $40.50 + $120.00 = $295.50.

**One inch of pallet height.** The hero pallets stand about 56 in, one inch over a 55 in cap that includes the pallet. Billed as two positions each, the day-1 count goes from 16 to 26: 26 × $19.37 + $121.20 = $624.82, or $193.70 (45%) more. Four-layer pallets (46 in, 32 cartons) avoid that: 400 ÷ 32 = 12.5, so 13 positions instead of 20, or $251.81 versus $387.40, before extra pallet in/out fees.

## What good looks like

Good storage terms let you rebuild the bill. The contract states each "Get in writing" item, the count method and day, proration and rounding, and reports show the quantity and unit behind every line. Judge a rate against the right population:

- **Ecommerce fulfillment 3PLs** that publish rates list about $30–$45 per pallet a month as of October 2026[3],[5],[6].
- **B2B and contract warehouses** often charge $10–$25[12],[13], and less at high volume[18].
- **Survey averages** can include both: $19.37 per pallet a month in The Fulfillment Advisor's 2026 survey of 500 warehousing and fulfillment providers[1].

See What do 3PLs charge? Fee-by-fee ranges, with methodology and caveats and [Verifying storage counts against inventory snapshots](/guides/verify-3pl-storage-counts).

## Common mistakes and red flags

The red flags are undefined units and counts:

- **Comparing rates across units** without applying them to your inventory.
- **Square-foot quotes that include aisles without saying so.**
- **Wrong product dims in the WMS,** which bill every month until corrected.
- **Storage lines with a dollar amount and no quantity or unit.** About a quarter of observed DTC 3PL contracts with storage charges have at least one storage line billed as a dollar amount only; ask for the count behind it.

## Questions to ask your 3PL

Before you sign, ask how each storage unit is defined, sized and counted:

Copy these into an email to your 3PL.

1. Which units do you bill storage on, and which SKUs or zones go in each?
2. What are the dimensions of each bin, shelf and pallet position? Does the height cap include the pallet?
3. For cubic billing, is it product cube or location cube, and where do the dims come from?
4. How do you bill mixed-SKU pallets, multi-lot SKUs and SKUs in both pick and reserve, and who pays to consolidate?
5. Is storage a snapshot, daily average or peak, on which day, and is there an initial charge on receipt?
6. Are there per-SKU or per-lot minimums, or separate quarantine, returns or overflow rates?
7. Do rates change in Q4 or as inventory ages?

## Checklist: comparing storage quotes in different units

Price each quote on your own inventory:

1. Pull on-hand by SKU for a typical month and your peak month.
2. Record carton dims, case pack (units per carton) and units per pallet under each cap.
3. Assign each SKU a location type under each quote.
4. Price each quote on its own count method, count day and any initial charge.
5. Add minimums, pallet in/out fees, aged-inventory and Q4 charges, then compare cost per unit shipped.

For the full method, see [How to compare rate cards apples to apples](/guides/compare-3pl-rate-cards).

## FAQ

### Is per-pallet or per-cubic-foot storage cheaper?

Per-pallet storage is cheaper once a pallet holds more than about 43 cu ft of goods (about 81% of a 48 in stack) at 2026 survey averages[1]. That holds if both quotes count inventory the same way and neither has a per-SKU minimum.

### Can I negotiate which storage unit I'm billed on?

Yes, more easily for part of the catalog (such as moving slow movers from pallet to bin or cubic pricing) than for the whole account. Ask at signing or renewal, and expect a trade-off such as a higher rate or a minimum.

### How much does pallet storage cost per month?

Pallet storage averaged $19.37 a month across the 500 providers in The Fulfillment Advisor's 2026 survey, which may include non-ecommerce warehouses[1]; as of October 2026, ecommerce 3PLs that publish rates list about $30–$45[3],[5],[6].
