Guides / Part IV · 3PL pricing and the rate card, line by line
How 3PL pricing works: the rate card, fee by fee
Every fee on a 3PL rate card: setup, receiving, storage, pick and pack, packaging, shipping, returns, accessorials, minimums, plus the main pricing models.
How does 3PL pricing work, and what fees are on a 3PL rate card?
3PL pricing is set by a rate card, the price list for a third-party logistics provider's services, and the contract's fee definitions. Most ecommerce rate cards price each activity separately: setup, receiving, storage, pick and pack, packaging, shipping, returns and accessorials, often with an account fee or a monthly minimum. Some larger 3PLs charge one all-in price per order.
Why the rate card matters more than the headline price
The headline price, usually the per-order fee, is one of about ten fee categories on a rate card, so two quotes with the same order fee can produce monthly bills that differ widely. To compare quotes, price a typical month of your own orders and inventory against every line, using each contract's fee definitions.
In 3PL Hub's 2026 report on 2,100 quotes from 306 requests for proposal (RFPs) made in 2023–2026, the top quote in the median RFP was 22% above the lowest for the same work[1]. That spread leaves out B2B fees, minimums, setup and courier rates, which typically widen it[1]. For most direct-to-consumer (DTC) brands that ship on the 3PL's carrier accounts, postage is the largest share of total 3PL spend, larger than all warehouse fees combined.
What a 3PL rate card is (and isn't)
A rate card, also called a rate sheet or fee schedule, is the list of a 3PL's fees, each with a unit and a price[2]. A full card can run to a few dozen lines, and some of them (accessorials, special projects, B2B lines) may not appear in a typical month.
Rate card, quote, contract and SOW
The rate card sets prices, usually including the monthly minimum; the contract or master services agreement (MSA) sets terms such as payment and price changes; and the statement of work (SOW) sets scope. The quote is the 3PL's proposal, built on your stated volumes, and the rate card can be a schedule to the contract.
Fee definitions, where they exist, can sit in the contract or SOW rather than on the card; the agreement should define each charge's trigger, inclusions and exclusions[3].
In the invoices we review, the same 3PL sometimes bills different brands on different pick-fee structures, or prices storage differently by warehouse, so price from your own contract's card.
Units of measure and billing triggers
Every fee has a unit of measure (UoM), such as a pallet, carton, unit, order, line, stock-keeping unit (SKU), cubic foot, hour, or a percentage of cost for markups[2],[4], and a billing trigger, the event that creates the charge. Fees are one-time (setup), recurring (an account fee; storage recurs but varies with inventory), per-activity, also called variable (a pick), or conditional (a minimum shortfall). Your cost per order counts postage, including any separate shipping invoice[6]:
Cost per order = (a month's warehouse fees + postage) ÷ orders shipped
For carrier adjustments, credits and one-time fees, see Calculating your true cost per order.
The fee categories on a 3PL rate card
Fees on a 3PL rate card fall into about ten categories, each with its own trigger and billing unit; some cards combine categories, such as packaging inside the order fee or account and technology fees in one line.
| Fee category | What triggers it | Common billing units | Type | Where to go deeper |
|---|---|---|---|---|
| One-time fees | Account opening, integration, SKU loading | Flat, hourly or per SKU | One-time; some integration fees recur | Setup, onboarding and implementation fees |
| Receiving | Inbound stock arrives | Pallet, carton, unit, hour or container; often more than one | Per-activity | Receiving priced per pallet, per carton, per unit or per hour: which is better for you? |
| Storage | Inventory occupies space | Pallet position, bin or shelf, location, cubic or square foot; often pallets plus bins | Recurring; varies with inventory | How storage is measured: snapshot, average, peak or billing-day count |
| Pick and pack | An order is picked and packed | Order fee with the first unit, plus additional units; or a lower order fee plus every unit | Per-activity | Per-order fees, first-pick vs. additional-pick, and per-unit pricing |
| Packaging materials | Materials are used | Per box or mailer, flat per order or unit, or rebilled at cost | Per-activity or monthly rebill | Packaging materials: who supplies them, how they're priced, and markup |
| Shipping | A package ships | Package by weight, zone and service; B2B freight | Per-activity | How 3PLs bill shipping: pass-through, markup or the 3PL's own rate card |
| Returns | A return is processed | Return plus additional units, or unit; some invoices show only a monthly total | Per-activity | Returns fees |
| Accessorials | Work outside the standard flow | Hour, unit, kit, event or quoted project | Per-activity, ad hoc | Fees you should never accept without definition |
| Account and technology | A month passes | Month; sometimes per order | Recurring | Account management and technology (platform) fees |
| Monthly minimum | Eligible fees fall below the minimum | Month (sometimes quarter), as a shortfall (true-up) line | Conditional | Monthly minimums: how they're calculated, when they apply, how to negotiate them |
The shares below come from 3PL invoices reviewed across DTC and ecommerce brands over the 12 months to October 2026.
One-time fees: setup, onboarding, integration and SKU setup
One-time fees pay for getting your account live. Setup, onboarding or implementation fees cover configuration, item conversions and testing before launch[3]; 55% of the 500 providers in The Fulfillment Advisor's 2026 survey, which may include non-ecommerce warehouses, charged one[28].
Integration fees connect your store or enterprise resource planning (ERP) system to the 3PL's warehouse management system (WMS), sometimes with a monthly charge[8]. SKU setup fees cover loading product data[3],[20].
Receiving fees
Receiving fees charge for handling stock that arrives at the warehouse, priced per pallet, carton, unit, hour or container (20' or 40')[8],[9],[11]. Depending on the card, they cover unloading only, or also counting, checking and putaway. Among observed DTC 3PL contracts, per pallet and per carton are the most common bases; about two-thirds of contracts that show a receiving unit use two or more in the same year, and about a third with receiving fees also show an inbound penalty.
A floor-loaded container (cartons stacked loose) takes more labor than a palletized one, so it costs more on hourly or per-carton pricing, and some cards set a separate container rate[11]. A shipment without an accurate inbound advance ship notice (ASN), the notice you send your 3PL before a shipment arrives, takes longer to check in, and some cards add a non-compliant receiving surcharge. Other inbound penalties include charges for a missed delivery appointment or for missing labels or paperwork.
Storage fees
Storage fees charge for the space your inventory occupies, billed per pallet position (one slot for one pallet), bin or shelf, cubic foot (cubic foot storage) or square foot[4],[11], or per storage location. A pallet position is usually billed in full however full the pallet is. A pallet over the 3PL's height cap, often about 55 inches at ecommerce 3PLs, can bill as two positions or at a tall-pallet rate, so check whether the cap includes the pallet itself.
The count can be a snapshot on a set day, a daily average, your peak, or prorated by the day or half month[4],[12],[13],[27].
| Storage practice | Share of observed DTC 3PL contracts with storage fees |
|---|---|
| Two or more storage units, usually reserve pallets plus bins for pick locations | About two-thirds of those that show a unit |
| Separate rates for quarantine, returned or overflow stock | About 30% |
| A charge for the first period when goods arrive, then each period after | About a quarter |
In The Fulfillment Advisor's 2026 survey, 41% of warehouses charged a long-term surcharge for aged stock[28]. If your contract has one, find the inventory age that triggers it, because the surcharge may not appear as its own invoice line.
Pick and pack (fulfillment) fees
On activity-based cards, DTC pick and pack (the labor to pull and pack an order) is billed in one of two structures, which differ in whether the order fee includes the first pick.
| Structure | How it's billed | How it reads in a quote | What to check |
|---|---|---|---|
| Order fee includes the first unit | Per-order fee covering the first pick, plus a fee per additional unit[1],[14] | Order fee looks higher in a quote, because it includes a pick | Single-unit orders show one fee, sometimes labeled "first pick" |
| Order fee plus a pick for every unit | Lower per-order fee for order handling, plus a pick fee for every unit | Order fee looks lower, but every order also carries a pick | Single-unit orders show an order fee and a pick charge |
Among observed DTC 3PL contracts where picks can be classified, the two are about equally common (roughly 40–50% each) and often come out at a similar cost per order once the first pick is counted. Additional picks are usually counted per unit, but some cards count lines or SKUs instead[2],[4].
B2B orders often carry their own order fee, plus case- or pallet-pick fees. The fee name "fulfillment" or "pick and pack" covers different work at different 3PLs; at some it includes the shipping label.
Packaging materials
Packaging is billed in one of three ways when it's a separate line; otherwise it sits in the order fee or you supply your own.
| How packaging is billed | Share of observed DTC 3PL contracts |
|---|---|
| Per box or mailer used, priced by size | About one in five |
| Flat fee per order or unit | Roughly 10–15% |
| Rebilled at cost or as a monthly supplies bill, sometimes with a markup such as cost plus 15%[11] | Roughly 40% |
| No packaging line: included in the order fee[8], or brand-supplied | About 30% |
Inserts are charged per insert[9], and custom packaging costs extra[17].
Shipping charges
Shipping (postage) reaches a 3PL invoice at carrier cost, at cost plus a markup, or at the 3PL's own rates[10],[17], and can arrive on its own invoice. Many 3PL invoices label parcel postage "freight".
| Basis | How it's billed | What to check |
|---|---|---|
| Pass-through | The 3PL's carrier cost, with no markup | A shipment-level file that matches carrier charges |
| Cost plus markup | Carrier cost plus a percentage or a per-label fee | The markup in writing; it is often not on the rate card |
| The 3PL's own rate card | The 3PL's price by weight, zone and service, keeping the gap over its carrier cost | How much of each carrier increase it passes on, and any cap[5],[25] |
| Your own carrier account | The carrier bills you; some 3PLs charge a fee for this[3] | Which orders and services ship on your account; your carrier agreement sets the divisor |
In about nine in ten of observed DTC 3PL contracts, small-parcel postage is on the 3PL's invoice, but surcharges such as fuel and residential fees aren't always itemized on the invoice itself, so ask for the shipment-level file.
Parcel rates vary by zone (distance band) and billable weight: the greater of actual weight and dimensional weight (a weight based on box size) wherever the carrier's dimensional-weight rule applies, which differs by carrier and service. B2B pallets move as freight: less-than-truckload (LTL) or full truckload (FTL).
Returns fees
Returns fees cover receiving and processing a return[9]; 87% of warehouses in The Fulfillment Advisor's 2026 survey charged them[28].
| Structure | How it's billed | Share of observed DTC 3PL contracts with returns fees |
|---|---|---|
| Per return plus additional units | A fee per return covering the first unit, plus a smaller fee per additional unit | About a third |
| Per unit | A fee for every returned unit | About one in six |
| Monthly total | One returns amount, with no per-return or per-unit basis on the invoice | About a third |
Roughly 40% of the same contracts also price returns by type or condition. Restocking, inspection and disposal can be separate lines[9],[19], and return labels and postage can also land on the 3PL invoice.
Accessorial and miscellaneous fees
On a 3PL rate card, an accessorial is a charge for warehouse work outside the standard flow (carriers use the word for shipping surcharges): special projects, hourly labor, kitting (assembling items into one sellable unit), relabeling, rush orders and inventory counts you request[16],[20],[21]. Among observed DTC 3PL contracts, roughly 40% include hourly project labor, per-unit and lump-sum project pricing are also common, and kitting is more often priced per kit or as a quoted project than by the hour. The work is real, but a line such as "special projects as needed" can't be checked against an invoice.
Account management and technology fees
Account management and technology fees are recurring charges for client service and for the 3PL's systems: the portal, integrations and reporting. Some 3PLs bill them separately and others combine them[10],[11]; some charge technology per order instead of, or as well as, a monthly fee. Roughly 40% of observed DTC 3PL contracts include a recurring account or technology fee.
Monthly minimums
A monthly minimum (minimum billing commitment) is a floor on monthly billing: you pay your eligible fees or the minimum, whichever is higher, with any gap billed as a separate shortfall (true-up) line. In The Fulfillment Advisor's 2025 survey, 47.2% of warehouses required one[7]; the 2026 edition doesn't report a share[28]. A monthly minimum almost always works this way; if a charge never credits against your activity, treat it as a fixed fee.
| Which fees count | What it means for you |
|---|---|
| Fulfillment fees only (the most common form) | Only order, pick and pack fees count[22], so a slow month can leave a shortfall |
| All warehouse fees | Storage and receiving count too; ask whether account and technology fees do |
| Warehouse fees plus postage | Far easier to meet when the 3PL bills shipping, and usually set higher; compare it as a share of the spend that counts |
In the invoices we review, the minimum usually shows only in months with a shortfall, so check the contract to learn whether you have one.
The main 3PL pricing models
3PLs use five main pricing models; for DTC brands the norm is activity-based pricing, with each activity at its own rate.
| Model | How you're billed | Who carries volume risk | Best fit | What to watch |
|---|---|---|---|---|
| Activity-based (à la carte) pricing | Each activity at its own rate[18],[23] | Mostly the 3PL, offset by any minimum | Most DTC brands at about 500–20,000 orders a month | Fee definitions; units per order |
| All-in or per-order pricing | One rate per order for defined tasks[15] | The 3PL, until it reprices | Stable order profiles | Units-per-order assumption; overages[15],[18] |
| Cost-plus and open-book pricing | Documented costs plus a markup or management fee[23],[24] | Mostly you | Dedicated operations at enterprise scale | 3PL mistakes become your cost[24] |
| Fixed plus variable pricing | Fixed fee for space, equipment and staff, plus variable labor[24] | You, for the fixed part | Dedicated, stable operations at enterprise scale | Costs drifting between buckets[24] |
| Gainshare and incentive-based pricing | Cost-based, with savings below a baseline shared[23] | Shared | Long-term relationships | The baseline can take a year or more to set[23] |
All-in pricing appears mainly at large, tech-enabled 3PLs and is uncommon in the invoices we review; it often still bills units beyond a set count, and usually excludes shipping, though some include the label[14],[15],[18]. Tiered rates that step down past set volumes can sit on any model[2],[4], and mixed models are called "hybrid"[18].
How rate cards change over time
Rate cards change through price escalators in the contract and, for shipping, through carrier rate increases. Many contracts plan an annual review, tied to an inflation index, labor costs or the renewal date[2]; a good escalator clause names the index (such as CPI, the Consumer Price Index), reference period, effective date and cap[3].
On pass-through shipping, each carrier's general rate increase (GRI) reaches you on the carrier's schedule[25],[26]; on a 3PL's own shipping rates, check how much of a GRI it passes on, and whether that is capped[5],[25]. See Annual price escalators and CPI clauses and Carrier general rate increases (GRIs) and how they flow through.
In the invoices we review, rates change more often than brands expect, sometimes one line at a time, and the rate in the 3PL's billing system can lag the rate card. Keep a dated copy of each version of the card, and check the first invoice covering work after any change against it.
Worked example: one month on an activity-based rate card (illustrative)
On the illustrative rates below, which are not benchmarks, a DTC brand shipping 2,000 orders in a month pays $7,081 in warehouse fees and $24,081 in total, or $12.04 per order.
The brand's orders average 1.6 units (3,200 units, so 1,200 additional units). It receives 8 pallets, stores 40 pallets and 100 bins, and puts one insert in each order; 3% of orders come back. Shipping averages $8.50 per label at carrier cost.
| Line | Quantity | Rate | Amount |
|---|---|---|---|
| Order fee (includes first unit) | 2,000 orders | $1.75 | $3,500 |
| Additional units | 1,200 units | $0.40 | $480 |
| Packaging (at cost) | 2,000 orders | $0.55 avg | $1,100 |
| Inserts | 2,000 | $0.15 | $300 |
| Receiving | 8 pallets | $12.00 | $96 |
| Pallet storage | 40 pallets | $20.00 | $800 |
| Bin storage | 100 bins | $3.00 | $300 |
| Returns | 60 (3% × 2,000) | $3.50 | $210 |
| Special projects | 1 hour | $45.00 | $45 |
| Account fee | 1 month | $250.00 | $250 |
| Subtotal before shipping | $7,081 |
On the other common pick structure, an order fee one pick lower ($1.35) plus $0.40 for every unit, the first two lines come to the same $3,980: (2,000 × $1.35) + (3,200 × $0.40).
Total = $7,081 warehouse subtotal + (2,000 × $8.50) shipping = $24,081
A 10% shipping markup would raise that to $12.89 per order. The $1.75 order fee is under half the $3.54 warehouse cost per order.
A $2,500 monthly minimum on pick-and-pack fees adds nothing this month, because those fees come to $3,980. In a 600-order month (960 units), they would come to $1,194, and the minimum would add a $1,306 true-up. To test an all-in quote against this card, use a true-cost-per-order calculator, such as the cost-per-order tool.
What a clear rate card looks like
A clear rate card lets you check every invoice line against it, whatever its price levels. It states:
- A unit, a trigger and a written definition for every fee[3].
- A closed accessorial list, or an hourly rate, minimum increment and approval rule for open items[3],[20].
- How often prices can change, the index and the cap[3],[25].
- Its effective date, and which warehouses it covers.
- The invoice dispute window and when it starts. A 30-day dispute window is common and 14 days is short; some windows count from month-end rather than the invoice date.
Invoices should show the quantity and unit behind each charge; in about a quarter of observed DTC 3PL contracts with storage fees, at least one storage line shows only a dollar amount.
To check your own rate card against a contract's confirmed pricing without granting portal or API access, run it through Feeproof's quick check or build the card itself in the rate card tool.
Common mistakes and red flags
These mistakes come from reading a quote's prices without its units, assumptions and terms:
- Comparing order fees alone. A low order fee may exclude the first pick, or sit beside higher additional-unit, packaging, storage or shipping charges[6],[10].
- Ignoring the units-per-order assumption. When your mix shifts, all-in prices can trigger overage charges or repricing[15],[18].
- Fees missing from the quote. Returns, onboarding, account fees and accessorials can surface only in the contract or the first invoice[10].
- Open-ended price changes. One 3PL consultancy calls "fees subject to change with 30 days' notice" unacceptable because it sets no limit on frequency[25].
In the invoices we review, common disputes come from scope rather than price: extra picks, inserts or kitting charged twice, and returns sorted into a higher-priced category.
Questions to ask your 3PL
Ask these before you sign, while minimums, ramp-up periods, price-change limits and fee definitions are easiest to negotiate[3],[25].
Copy these into an email to your 3PL.
- Is shipping billed at carrier cost, cost plus a percentage, or your own rate card, and can I get a shipment-level file?
- Which dimensional-weight divisor do you bill with on each service? Some 3PLs don't disclose it; ask for it in writing.
- Does the order fee include the first unit, and are additional picks counted by unit, line or SKU?
- How, and on what day, do you count storage, and do you charge for the month goods arrive?
- Which fees count toward the minimum (fulfillment only, all warehouse fees, or postage too), and is it waived or stepped down during ramp-up?
- Is packaging billed per box, as a flat fee or rebilled at cost, and with what markup?
- What puts a return in a higher-priced category?
- Which accessorials need my written approval before you bill them?
Checklist: reading a 3PL rate card
Four steps turn a rate card from a price list into a monthly cost you can compare:
- List every fee and its unit. The audit checklist tool sets out a standard rate card anatomy you can use as a template.
- Mark each fee one-time, recurring or per-activity, and find its definition in the contract or SOW.
- Run a real month of orders and inventory through each card, including orders of one, two and three units.
- Resolve anything undefined, in writing, before you sign.
If time is short, start with the shipping basis (the largest share of spend for most DTC brands), then pick scope, which fees count toward the minimum, storage measurement, returns categories and accessorials.
FAQ
How much does a 3PL cost per order?
No single figure fits every brand, because cost per order moves with units per order, packaging, inventory and where you ship. Work it out from a month of your own data, as in the worked example above, using the cost-per-order tool.
Are packaging materials included in 3PL pricing?
Sometimes. Packaging can sit inside the order fee[8], or be billed per box or mailer, as a flat fee per order or unit, or rebilled at cost, sometimes with a markup[11]. Ask which applies before you compare order fees.
How often do 3PL rate cards change?
Many contracts plan an annual review, tied to an inflation index, labor costs or the renewal date[2], and shipping rates change on each carrier's schedule[25],[26]. In the invoices we review, rates change more often than brands expect, sometimes one line at a time. Keep a dated copy of each version of the card.
Are 3PL fees negotiable?
Minimums, ramp-up periods, price-change limits and fee definitions are easiest to negotiate before you sign[3],[25]. Price a typical month of your own orders and inventory against every line first, so you know which terms move your total.
Sources
[1] 3PL Hub, 2026 RFP Pricing Report [2] Industry rate card and fee schedule guidance [3] 3PL contract and SOW drafting guidance [4] Warehouse billing unit-of-measure standards [5] Carrier rate increase pass-through analysis [6] Cost-per-order methodology [7] The Fulfillment Advisor, 2025 Warehouse Survey [8] 3PL integration and WMS fee surveys [9] Returns and receiving fee structure surveys [10] 3PL invoice audit practices [11] Storage and packaging billing surveys [12] Storage measurement methodology (snapshot vs. average) [13] Storage proration practices [14] Pick-and-pack fee structure comparisons [15] All-in pricing model analysis [16] Accessorial fee definitions and surveys [17] Packaging and shipping cost pass-through practices [18] Pricing model taxonomy (activity-based, all-in, hybrid) [19] Returns processing cost breakdowns [20] SKU and accessorial setup fee surveys [21] Kitting and special project pricing practices [22] Monthly minimum fee eligibility practices [23] Cost-plus and gainshare pricing models [24] Dedicated operations pricing practices [25] 3PL contract negotiation and escalator clause guidance [26] Carrier general rate increase schedules [27] Billing-day inventory count methodology [28] The Fulfillment Advisor, 2026 Warehouse Survey